FX35 RWD V6-3.5L (VQ35HR) (2010)
- Hose clamp should not interfere with the bulge of fluid cooler tube.
Exploded View
FLUID COOLER SYSTEM
Exploded View
Removal and Installation
FLUID COOLER SYSTEM
Removal and Installation
REMOVAL
1. Shift the selector lever to "N" position, and release the parking brake.
2. Remove air duct (inlet). See: Engine, Cooling and Exhaust/Engine/Tune-up and Engine Performance Checks/Air Cleaner Housing/Air Cleaner
Fresh Air Duct/Hose/Service and Repair/Exploded View.
3. Remove engine under cover with a power tool. See: Body and Frame/Interior Moulding / Trim/Service and Repair/Floor Side Fairing/Exploded
View.
4. Remove A/T fluid cooler hose A and A/T fluid cooler hose B.