FX50 AWD V8-5.0L (VK50VE) (2009)
-
Apply new engine oil to both oil seal lip (A) and dust seal lip
(B).
-
Install it so that each seal lip is oriented as shown in the figure.
CAUTION:
Be careful not to scratch or make burrs on circumference of oil seal.
-
Using a suitable drift [outer diameter: 56 mm (2.20 in)], press fit oil seal until it becomes flush with front cover end face.
-
Check the garter spring is in position and seal lips are not inverted.
2. Install in the reverse order of removal.