FX50 AWD V8-5.0L (VK50VE) (2009)
Trunk Lamp: Service and Repair
Luggage Side
Exploded View
LUGGAGE ROOM LAMP
LUGGAGE SIDE : Exploded View
Removal and Installation
LUGGAGE ROOM LAMP
LUGGAGE SIDE : Removal and Installation
CAUTION:
Disconnect the battery negative terminal or remove the fuse.
REMOVAL
1. Insert any appropriate tool into the gap between the luggage room lamp (luggage side) and luggage side finisher lower. And then remove the
luggage room lamp (luggage side).
2. Disconnect the luggage room lamp (luggage side) connector.
INSTALLATION
Install in the reverse order of removal.
Replacement
LUGGAGE ROOM LAMP
LUGGAGE SIDE : Replacement
CAUTION:
-
Disconnect the battery negative terminal or remove the fuse.
-
Never touch the glass of bulb directly by hand. Keep grease and other oily matters away from it.
Never touch bulb by hand while it is lit or right after it turns OFF.
-
Never leave bulb out of lamp reflector for a long time because dust, moisture, smoke, etc. may affect the performance of lamp. When
replacing bulb, always replace it with new one.
LUGGAGE ROOM LAMP (LUGGAGE SIDE) BULB
1. Remove the luggage room lamp (luggage side). Refer to See: Exploded View.
2. Remove the screw. And then remove the lens.
3. Remove the bulb.