G20 L4-2.0L (SR20DE) (1992)
Axle Shaft: Service and Repair
Disassembly
Fig. 4 Snap Ring Removal
Fig. 5 Exploded View Of Driveshaft
INNER JOINT
1.
Remove both boot bands. Scribe matching marks on slide joint housing and inner race before separating joint assembly.
2.
Pry off snap ring with a screwdriver. Fig. 4.
3.
Pull out slide joint housing.
4.
Scribe matching marks on inner race and driveshaft.
5.
Remove snap ring ``C,'' then remove ball cage, inner race and balls as a unit. Fig. 5.
6.
Remove snap ring ``B'' and draw out boot.
Fig. 6 Outer CV Joint Removal
OUTER JOINT