G35 Sedan 2WD V6-3.5L (VQ35DE) (2005)
INSTALLATION
Install all parts in the reverse order of while taking care of the following.
^
Apply brake grease to the contact areas shown in the figure.
^
The orientation of adjuster is different from left to right. Assemble adjuster so that the threaded part is expanded when rotating it to the direction
shown by the arrow. Shorten adjuster to assemble. When disassembling adjuster, apply brake grease to the thread.
^
Adjust parking brake pedal or lever stroke to the specified amount.
^
After replacing shoe or disc rotor, or if brake does not function well, perform the break-in operation as follows.