G35 Sedan 2WD V6-3.5L (VQ35DE) (2005)
3.
Check the CONSULT-II's Charger Input reading (see Figure D).
NOTE:
^
"Battery Voltage" is the voltage level of CONSULT-II's battery.
^
"Charger Input" is the voltage level of the vehicle's battery. (It must be above 12 volts.)
CAUTION:
If the "Charger Input" is below 12 volts:
^
A list of items to check when "Charger Input" voltage is below 1 2V is contained in the "ECM Reprogramming For Infiniti Vehicles" general
procedure.
Step Three: Reprogram the ECM
^
General procedure called "ECM Reprogramming For Infiniti Vehicles"
Step Four: "Wrap-up" After Reprogramming is finished
1.
Turn the ignition switch "OFF" and CONSULT-II OFF".
2.
Wait more than 10 seconds then;
a.
Turn the ignition switch "ON" for 2 second then
b.
Turn the ignition switch "OFF" again for 10 seconds (see Figure E). This will reset ECM "self learned Data.