infiniti Workshop Repair Guides

Infiniti Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 7159 > < Initial Inspection and Diagnostic Overview|Page 7157
Page 2
background image

YES  -  Replace BCM. Refer to See: Body and Frame/Body Control Systems/Body Control Module/Service and Repair/Removal and Installation.
NO  -  Replace front driver side door switch. Refer to See: Body and Frame/Locks/Power Locks/Service and Repair/Removal And Installation.

The Seat Belt Warning Continues Sounding, Or Does Not Sound

THE SEAT BELT WARNING CONTINUES SOUNDING, OR DOES NOT SOUND

Description

-

Seat belt warning chime does not sound even though driver seat belt is unfastened.

-

Seat belt warning chime sounds even though driver seat belt is fastened.

THE SEAT BELT WARNING CONTINUES SOUNDING, OR DOES NOT SOUND

Diagnosis Procedure

1.CHECK SEAT BELT WARNING LAMP
1. Turn ignition switch ON.
2. Check the operation of the seat belt warning lamp in the combination meter.

Seat belt fastened        :OFF
Seat belt unfastened    : ON

Is the inspection result normal?
YES  -  Replace BCM.
NO  -  GO TO 2.
2.CHECK UNIFIED METER AND A/C AMP. INPUT SIGNAL
1. Connect the CONSULT-III.
2. Select the "Data Monitor" of the "METER/M&A" and check the "BUCKLE SW" monitor value. Refer to See: Component Tests and General

Diagnostics/Seat Belt Buckle Switch Signal Circuit/Component Function Check.

Is the inspection result normal?
YES  -  Replace combination meter.
NO  -  GO TO 3.
3.CHECK SEAT BELT BUCKLE SWITCH (DRIVER SIDE) SIGNAL CIRCUIT
Check the seat belt buckle switch (driver side) signal circuit. Refer to See: Component Tests and General Diagnostics/Seat Belt Buckle Switch Signal
Circuit/Diagnosis Procedure.
Is the inspection result normal?
YES  -  GO TO 4.
NO  -  Repair harness or connector.
4.CHECK SEAT BELT BUCKLE SWITCH (DRIVER SIDE)
Check the seat belt buckle switch (driver side). Refer to See: Component Tests and General Diagnostics/Seat Belt Buckle Switch Signal
Circuit/Component Inspection.
Is the inspection result normal?
YES  -  Replace unified meter and A/C amp.
NO  -  Replace seat belt buckle switch (driver side). Refer to See: Restraint Systems/Seat Belt Systems/Seat Belt Buckle/Service and Repair/Front
Seat Belt/Removal And Installation.

Initial Inspection and Diagnostic Overview|Page 7159 > < Initial Inspection and Diagnostic Overview|Page 7157