G37x Coupe AWD V6-3.7L (VQ37VHR) (2009)
clearance between the glass and body side weather-strip is not parallel.
-
Raise the glass fully and adjust the glass top end and body side welt fitting with the adjusting bolt (B), (C), or
(D) as shown in the figure below.
NOTE:
-
Always start at adjusting bolt (B). If the desired angle is not achieved, then proceed to adjusting bolt (C) and
(D) respectively.
-
Turn the adjusting bolt clockwise to move the door glass upper end outward.
-
Turn the adjusting bolt anticlockwise to move the door glass upper end inward.
-
Adjustment process with adjusting bolt (D) is the inverse of adjusting bolt (B) and (C)
-
When adjusting with adjusting bolt (D), turn the adjusting bolt clockwise to move the door glass upper end inward, then anticlockwise to move the
door glass upper end outward.