G37x Coupe AWD V6-3.7L (VQ37VHR) (2009)
Front Door Window Motor: Service and Repair
DOOR REGULATOR
Removal and Installation
REMOVAL
1. Remove the door glass. Refer to See: Window Glass/Front Door Window Glass/Service and Repair/Door Glass/Removal And Installation.
2. Disconnect power window motor harness connector.
3. Remove the module assembly mounting bolts shown by the arrows, both seals (B) and then remove the nuts under the seals.
4. Remove the module assembly from the door panel.
INSTALLATION
Install in the reverse order of removal.