G37x Coupe AWD V6-3.7L (VQ37VHR) (2009)
Power Window Switch: Service and Repair
POWER WINDOW MAIN SWITCH
Removal and Installation
REMOVAL
1. Remove the door finisher. Refer to See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Front Door Panel/Service and Repair.
2. Power window main switch (1) is removed from door finisher using flat-bladed screw driver (A) etc.
CAUTION:
Do not fold the pawl of power window main switch finisher.
NOTE:
The same procedure is also performed for power window subswitch.
INSTALLATION
Install in the reverse order of removal.
NOTE:
Power window main switch is exchanged or is detached it is necessary to do the initialization procedure. Refer to See: Testing and
Inspection/Programming and Relearning/Additional Service When Replacing Control Unit/Special Repair Requirement.