infiniti Workshop Repair Guides

Infiniti Workshop Service and Repair Manuals

Engine Controls - Low Battery Voltage/No Start|Page 167 > < A/T Controls - Harsh Shifts/Multiple DTC's Set/Vibration|Page 162
Page 1
background image

Technical Service Bulletin # 11-025

Date: 110328

Engine Controls - Low Battery Voltage/No Start

Classification: EL11-009

Reference: ITB11-025

Date: March 28, 2011

2011 M; BATTERY LOW VOLTAGE / NO START

APPLIED VEHICLES: 2011 M37 and M56 (Y51)

APPLIED VINs and DATES: 
2011 M37 2WD - Vehicles built before JN 1BY1AP(*)BM 322410 and April 20, 2010

2011 M37 AWD - Vehicles built before JN 1BY1AR(*)BM 373976 and June 21, 2010

2011 M56 2WD - Vehicles built before JN 1AY1AP(*)BM 520437 and May 14, 2010

2011 M56 AWD - Vehicles built before JN 1AY1AR(*)BM 570332 and May 14, 2010

NOTE:

This bulletin does not apply to M Hybrid (Y51HV).

IF YOU CONFIRM:

An Applied Vehicle has a "battery low voltage" or no start condition due to a specific customer use pattern (see Repair Overview shown in this bulletin).

NOTE:

A battery low voltage condition may cause an engine no crank or no start condition.

ACTION:

1. Confirm this bulletin applies (see Repair Overview flowchart below).

NOTE:

If the customer use pattern DOES NOT MATCH the description in the Repair Overview this bulletin DOES NOT APPLY. Go back to ASIST and / or
the Electronic Service Manual (ESM) for further diagnostic and repair information.

2. If this bulletin applies use the Repair Overview flowchart below to determine which repair procedures to apply to your vehicle.

IMPORTANT:

The purpose of ACTION (above) is to give you a quick idea of the work you will be performing. You MUST closely follow the entire Repair Overview
as it contains information that is essential to successfully completing this repair.

PARTS INFORMATION

Engine Controls - Low Battery Voltage/No Start|Page 167 > < A/T Controls - Harsh Shifts/Multiple DTC's Set/Vibration|Page 162