M37 V6-3.7L (VQ37VHR) (2011)
CLAIMS INFORMATION
Reprogram the 4WAS Front Control Unit
Reprogram the 4WAS Front Control Unit
IMPORTANT:
Before starting, make sure:
^ ASIST on the C-III computer has been freshly synchronized (updated).
^ All C-III software updates (if any) have been installed.
NOTE:
The C-III computer automatically gets applicable reprogramming data during ASIST synchronization.
^ C-III PCMCIA Card Adapter is installed.
^ C-III Security Card is installed.
^ A screen print for Warranty documentation can be done from C-III during this process while still cable-connected to the vehicle.
1. Use the USB cable to connect the Vehicle Interface (VI) to the C-III computer and then connect the VI to the vehicle.