Q45 V8-4.5L (VK45DE) (2002)
A.
Carefully lift up on the FRONT end of the finisher until the two front and two middle clips are released (see Figure 2a). Use caution when
lifting up the finisher not to break the clips.
B.
Carefully lift up on the REAR end of the finisher until the two rear clips are released (see Figure 2b).
NOTE:
Do not lift up on the portions of the A/T finisher that run next to the cup holder as they can break.
3.
Remove the two front and two rear screws that secure the center console to the vehicle (see Figure 3).
4.
Remove the cup holder assembly by removing two screws and carefully lifting up the rear of the assembly until the two rear clips are released (see
Figure 3).