infiniti Workshop Repair Guides

Infiniti Workshop Service and Repair Manuals

Engine - Knocking Noise On Acceleration|Page 5516 > < Engine - Knocking Noise On Acceleration|Page 5510
Page 1
background image

Cruise Control Servo Cable: All Technical Service Bulletins
Engine - Knocking Noise On Acceleration

Classification:
BF93-012

Section:
Body/Frame

Models:
1990-93 Q45 (G50)

Reference:
TECHNICAL BULLETIN ITB93-020

Date:
March 25, 1993

ENGINE KNOCKING NOISE ON ACCELERATION

APPLIED MODEL:
1990-93 Q45 (G50)

APPLIED VIN:
JNKNG01CXPM220206

SERVICE INFORMATION:

Some Q45's may exhibit a knocking type noise (similar to spark knock) from the engine compartment during moderate to hard acceleration. Such a noise
is described as being more apparent when the engine is cold and the ambient temperature is low.

In most cases, the source of this noise, is the ASCD actuator assembly. The noise travels along the ASCD cable which is connected to a bracket at the
bulkhead. This provides a path for the noise to travel and become noticeable inside the vehicle (usually at the center vent location) [Figure 1].

SERVICE PROCEDURE:

1.

Verify the noise incident by driving the vehicle when the engine is fully cold.

Engine - Knocking Noise On Acceleration|Page 5516 > < Engine - Knocking Noise On Acceleration|Page 5510