QX4 2WD V6-3.5L (VQ35DE) (2003)
1. Remove side lids. Using the TAMPER RESISTANT TORX (Size T30), remove left and right special bolts.
2. Remove lower lid from steering wheel, and disconnect air bag module connector and horn connector. Air bag module can then be removed.
3. Remove ASCD steering switch and audio steering switch from driver air bag module.
CAUTION: Always place air bag module with pad side facing upward.
Do not attempt to disassemble air bag module.
The special bolts are coated with bonding agent. Do not use old bolts after removal; replace with new ones.
Do not insert any foreign objects (screwdriver, etc.) into air bag module connector.