Hombre S Space Cab 2WD V6-4.3L (2000)
5.
Ream the latch assembly hole (2) using a 9.5 mm (3/8 in) drill bit.
6.
Remove the latch assembly fastener (3) from the latch assembly.
7.
Loosen but do not remove the latch assembly fastener (1).
8.
Apply two thin coats of rust penetrating lubricant (corrosion inhibitor) to the area around the latch assembly fastener hole (2).
9.
Install the new fastener and new cable (2) to the latch assembly.
Tighten
Tighten the fastener to 9 N m (80 lb in).
10.
Install and tighten the fastener (3) and tighten the fastener (1).
Tighten
Tighten fasteners (1) and (3) to 25 N m (18 lb ft).
11.
Attach the new cable onto the bolt head of the endgate striker bolt.
12.
Perform Steps 2-11 for the opposite side of the end gate.
13.
Close the endgate.
Parts Information
Customer Reimbursement
All customer requests for reimbursement for previous repairs for the special policy condition will be handled by the lsuzu Owner Relations Department,
not by dealers.
An Isuzu Motors America, Inc. Special Policy Customer Reimbursement Claim Form is included with the customer letter.
Special Policy Submission Information
