isuzu Workshop Repair Guides

Isuzu Workshop Service and Repair Manuals

Air Injection Check Valve > < Air Injection Vacuum Control Solenoid Valve|Service and Repair|Page 2387
Page 6
background image

8. Align the steering linkage shield.
9. Install the linkage shield mounting bolts.

Tighten:
Tighten the bolts to 33 N.m (24 lb ft).

10. Lower the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.

11. Connect the negative battery cable.

Air Injection Check Valve > < Air Injection Vacuum Control Solenoid Valve|Service and Repair|Page 2387