Hombre S Space Cab 2WD V6-4.3L (2000)
14. Position the two clamps (2) between the locating dimples (1) at either end of the adjuster tube.
15. The clamps must be positioned within the correct angular travel, as shown.
16. Ensure that the clamp slot (2) is not aligned with the adjuster tube slot (1).
17. Maintain the position of each tie rod end as the clamps are tightened in order to ensure free movement of each joint.
18. When clamps are tightened to specifications, the ends may touch.
19. Install the adjuster tube clamp bolts.
Tighten
Tighten the adjuster tube clamp bolts to 21 Nm (16 ft. lbs.).
