Hombre XS Space Cab 2WD L4-2.2L CPC (1999)
5. Install a new compressor shaft seal retaining ring (2), using internal snap ring pliers (1).
Make sure that the chamfer side of the retaining ring is facing up and that the retaining ring snaps into the groove.
6. Leak test the compressor, using the J 39893.
1. Install the J 39893 onto the compressor and pressurize the suction and high-side of the compressor with R-134a.
2. Temporarily install the shaft nut.
3. With the compressor in a horizontal position, rotate the compressor shaft in the normal direction of rotation, several turns by hand.
4. Leak test the seal area and repair if necessary.
Remove the shaft nut.
7. Recover the refrigerant.
8. Remove the J 39893.
9. Remove and clean any excess oil resulting from installing the new seal parts from the shaft and inside the compressor neck.
10. Install the compressor clutch plate and hub assembly.
11. Remove the compressor from the J 41790.
12. Install the compressor into the vehicle.
