Hombre XS Space Cab 2WD L4-2.2L CPC (1999)
6. Fully engage the lip of the J 42136 into the recessed portion of the seal (1) by turning the handle clockwise.
7. Remove the compressor shaft seal from the compressor with a rotary pulling motion.
8. Recheck the shaft and inside of the compressor neck for dirt or foreign material and make sure these areas are perfectly clean before installing the
new compress or shaft seal.
Installation Procedure
Tools Required
-
J 39893 Pressure Test Adaptor
-
J 34614 Shaft Seal Protector
-
J 42136 A/C Lip Seal Remover
1. Dip the new compressor shaft seal (1) in clean 525 viscosity refrigerant oil and assemble the seal onto the J 42136, by turning the handle
clockwise.
2. Install the J 34614 onto the compressor shaft.
3. Using a rotary motion, slide the new compressor shaft seal onto the compressor shaft until the seal is fully seated.
4. Remove the J 34614 by turning the handle counter clockwise.