Hombre XS Space Cab 2WD V6-4.3L (1998)
Tilt Steering Column
2. Park lock cable assembly (48) from lock module assembly (15).
-
Lock cylinder should be in "OFF-LOCK" position and gear shift in "PARK" position.
-
Insert small blade screwdriver into slot in module assembly (15). Push against locking tab on end of cable assembly (48) and remove.
3. Pry actuator arm of electrical (BTSI) actuator (61) from outer shift cable ball stud on cable shift cam assembly (44) and mounting pin on jacket
(58).
4. Transaxle cable from inner shift cable ball stud on cable shift cam assembly (44).