Hombre XS Space Cab 2WD V6-4.3L (1998)
balls and needle rollers are not handled carefully.
7. Remove the following items:
-
The spacer ring (1)
-
The spider assembly (2)
-
The second spacer ring (3)
-
The tripot seal (4)
6. Clean the axle shaft. Use a wire brush to remove any rust in the seal mounting area (grooves).
9. Inspect the following items:
-
The needle rollers
-
The needle bearings
-
The trunnion
10. Check the tripot housing for unusual wear, cracks, or other damage. Replace any damaged parts.
ASSEMBLY PROCEDURE
-
Tools Required
-
J41048 Swage Clamp Tool
-
J35566 Large Seal Retaining Clamp Tool
1. Slide the new small swage clamp (2) and seal (1) to their proper position (3) on the axle shaft.
2. Install the new swage clamp onto the neck of the seal. Do not swage.
3. Position the neck of the seal in the seal groove on the axle shaft.
