Hombre XS Space Cab 2WD V6-4.3L (1998)
4. Hold the inner race (1) at 90 degrees to the centerline of the cage.
5. Align the lands of the inner race (2) with the windows of the cage (3).
6. Insert the inner race into the cage, by rotating the inner race downward.
7. Insert the cage (4) and inner race into the outer race (1).
8. Place a brass drift against the cage (1).
9. Tap gently on the brass drift in order to tilt the cage (1).
10. Install the first ball (2) when the cage tilts.
11. Repeat previous step to reinstall all of the balls.
ASSEMBLY PROCEDURE
-
Tools Required
-
J35910 Seal Clamp Tool
-
J41048 Swage Clamp Tool
1. Pack the CV joint seal and the CV joint assembly with the grease supplied in the kit. The amount of grease supplied in this kit has been
pre-measured for this application.