i-290 2WD L4-2.9L (2008)
Antenna Cable: Service and Repair
Antenna Cable Replacement
Antenna Cable Replacement
Removal Procedure
1. Remove the right front door sill plate. Refer to Front Side Door Sill Plate Replacement (See: Body and Frame/Interior Moulding / Trim/Scuff
Plate/Service and Repair/Front Side Door Sill Plate Replacement).
2. Remove the right hinge pillar trim panel. Refer to Body Hinge Pillar Trim Panel Replacement - Left Side (See: Body and Frame/Interior Moulding
/ Trim/Trim Panel/Service and Repair/Body Hinge Pillar Trim Panel Replacement - Left Side).
3. Remove the instrument panel (I/P) compartment door. Refer to Instrument Panel Compartment Door Replacement (See: Body and Frame/Interior
Moulding / Trim/Glove Compartment/Service and Repair/Removal and Replacement/Instrument Panel Compartment Door Replacement).
4. Disconnect the radio antenna cable (1) from the extension cable.
5. Remove the grommet from the hinge pillar in an outbound direction.
6. Attach a mechanics wire to the to the antenna cable (1).
7. Remove the antenna mast. Refer to Fixed Antenna Mast Replacement (See: Antenna Mast/Service and Repair).
8. Remove the screws retaining the antenna base.