i-290 2WD L4-2.9L (2008)
5. Connect the digital receiver extension cable (1) to the receiver.
6. Attach the retainers (2) to the I/P.
7. Connect the electrical connector (3).
8. Close the (I/P) compartment door.
9. Attach the 3 coax cable retainers to the windshield pillar.
10. Connect the digital radio antenna connectors (1).
11. Attach the 2 upper coax cable retainers to the header panel.
12. Install the headliner. Refer to Headlining Trim Panel Replacement (Crew Cab) (See: Body and Frame/Interior Moulding / Trim/Headliner/Service
and Repair/Headlining Trim Panel Replacement (Crew Cab))Headlining Trim Panel Replacement (Extended Cab) (See: Body and Frame/Interior
Moulding / Trim/Headliner/Service and Repair/Headlining Trim Panel Replacement (Extended Cab))Headlining Trim Panel Replacement
(Regular Cab) (See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Headlining Trim Panel Replacement (Regular Cab)).