i-290 2WD L4-2.9L (2008)
14. Connect the PCV dirty air tube (2) to the camshaft cover.
15. Connect the engine wiring harness retainer (4) to the intake manifold (5).
16. Connect the engine wiring harness electrical connector (3) to the MAP sensor.
17. Connect the brake booster hose (6) to the brake booster.
18. Install the oil level indicator and tube. Refer to Oil Level Indicator and Tube Replacement (See: Engine Lubrication/Engine Oil Dip Stick - Dip
Stick Tube/Service and Repair).
19. Install the battery box. Refer to Battery Box Replacement (See: Starting and Charging/Battery/Battery Tray/Service and Repair/Battery Box
Replacement).
20. Install the throttle body. Refer to Throttle Body Assembly Replacement (See: Powertrain Management/Fuel Delivery and Air Induction/Throttle
Body/Service and Repair).