i-290 2WD L4-2.9L (2008)
5. Remove the bolt securing EVAP canister purge solenoid valve to the engine.
6. Remove the EVAP canister purge solenoid valve from the engine.
Installation Procedure
1. Position the EVAP canister purge solenoid valve to the engine.
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice) .
2. Install the bolt securing EVAP canister purge solenoid valve to the engine.
Tighten the evaporative emission (EVAP) canister purge solenoid valve bolt to 10 N.m (89 lb in).
