i-350 L5-3.5L (2006)
7. Remove the release cable from the park brake pedal mounting bracket.
8. Remove the release cable from the release lever.
9. Remove the release cable.
Installation Procedure
Important Ensure that the release cable is properly seated in the release lever.
1. Install the release cable to the release lever.
Important When installing the park brake release handle or cable, ensure that the locking tabs are properly seated. A snap or clip should be heard or
felt if installed properly.
2. Attach the release cable in the park brake pedal mounting bracket.
3. Install the release cable to the knee bolster panel.