isuzu Workshop Repair Guides

Isuzu Workshop Service and Repair Manuals

Brakes - Revised Park Brake Cable Fastener Torque|Page 5175 > < Brakes - Excessive Rear Brake Grab|Page 5169
Page 1
background image

Parking Brake Cable: Technical Service Bulletins
Brakes - Revised Park Brake Cable Fastener Torque

TSB SB06-09-S001

Revised Park Brake Fastener Tightening Specification
(Service Manual Revision)

ISSUE DATE: JANUARY 30, 2005

Affected Vehicles

2006 Isuzu i-280/i-350 (TI)

Service Information

This bulletin is being issued to revise the fastener tightening specification in the Parking Brakes sub-section of the Service Manual.

NOTE

Information released on paper and electronic format prior to bulletin release cannot be updated. For the most current and up to date information refer
to the website.

The following information has been updated within the Service Manual. If you are using a paper version of this Service Manual, please make a reference
to this bulletin on the affected page.

A parking brake fastener tightening specification application has been deleted and replaced with a new application:

Deleted: Bolt - Retainer, Park Brake Cable-to-Leaf Spring - 20 N.m (15 lb ft)

Replaced with: Nut - Retainer, Park Brake Cable-to-Leaf Spring - 9 N.m (80 lb in)

Disclaimer

Brakes - Revised Park Brake Cable Fastener Torque|Page 5175 > < Brakes - Excessive Rear Brake Grab|Page 5169