Oasis LS L4-2253cc 2.3L SOHC VTEC MFI (1999)
Front Passenger's Airbag Connectors / SRS Main Harness
3. Disconnect the 2P connector between the front passenger's airbag and the SRS main harness. When disconnected, the airbag connector is
automatically shorted.
4. Remove the four mounting nuts.
Front Passenger's Airbag Mounting Nuts
5. Lift the front passenger's airbag out of the dashboard.
NOTE: The airbag lid has pawls on its side which attach it to the dashboard. To remove the airbag, cover the lid and dashboard with a cloth, and
pry carefully with a flat tip screwdriver.
Do not confuse the lower mounting nuts with the upper mounting nuts. The upper mounting nuts are not self-locking.
CAUTION: Be sure to install the SRS wiring so that it is not pinched or interfering with other parts.
6. Place the new front passenger's airbag into the dashboard. Tighten the front passenger 5 airbag mounting nuts.
