Oasis LS L4-2253cc 2.3L SOHC VTEC MFI (1999)
Front Passenger's Side
7. Loosely install all four mounting nuts. Tighten the upper two nuts first, then the lower two nuts.
NOTE: If there is some space between the airbag assembly lid and the dashboard after tightening the nuts, loosen the lower mounting nuts, and
lightly press down the airbag assembly. Then retighten the lower mounting nuts.
8. Reconnect the front passenger's airbag connector to the SRS main harness. Attach the airbag connector to the connector holder.
Front Passenger's Side
9. Reinstall the dashboard compartment in the dash board.
10. Connect the battery positive cable, then connect the negative cable.
11. After installing the airbag, confirm proper system operation:
Turn the ignition switch ON; the SRS indicator light should come on for about six seconds and then go off.