Rodeo LS 2WD V6-3165cc 3.2L SOHC (6VD1) (1997)
/Page-1269003.png)
b. Clamp hub and disc assembly in vise, using protective pads. Remove six (6) disc-to-hub retaining bolts.
c. Place hub on a suitable work surface and remove wheel studs, as required, using a hammer.
INSPECTION (VISUAL CHECK)
Check the following parts for wear, damage or other abnormal conditions.
-
Hub
-
Hub bearing
-
Bearing outer race
-
Disc
-
Oil seal
Installation
TOOLS REQUIRED
-
J-36828 Installer
-
J-8092 Grip
-
J-36829 Installer
-
J-36830 Installer
-
Or Equivalent
