Rodeo LS 2WD V6-3165cc 3.2L SOHC (6VD1) (1997)
Brake Rotor/Disc: Service and Repair
Removal and Installation
Removal
Replacing Brake Rotors
When installing new brake rotors, do not refinish the surfaces. These parts are at the correct level of surface finish.
TOOLS REQUIRED
-
J-36827 Wrench
-
Or Equivalent
NOTE: Before removal, jack up the front of vehicle and support frame with jack stands.
1. Bolt.
2. Bake caliper.
a. Remove the two bolts from the rear side of the knuckle arm, then remove the brake caliper, with the brake hose attached.
b. Use a wire to attach the brake caliper to the upper link.
3. Bolt.