Rodeo LS 2WD V6-3165cc 3.2L SOHC (6VD1) (1997)
5. Remove the camber and caster shims taking care to note the positions and number of shims.
6. Remove the upper control arm assembly.
7. Loosen, the remove the the nut and plate.
8. Press out the bushing using a J-29755 remover tool.
9. Remove the fulcrum pin.
10. After removing the arm assembly, check the upper control arm, the arm bushing, and the fulcrum pin making necessary parts replacements if wear,
damage, corrosion or any other abnormal conditions are found through inspection.