Rodeo Sport 2WD L4-2.2L (2002)
INSTALLATION PROCEDURE
1. Connect the intake air duct at the throttle body and at the air filter box. Make sure retaining hole is inserted to the intake air duct bracket.
2. Tighten retaining clamp at the throttle body and at the air filter box.
3. Install a nut to the intake air duct bracket and tighten.
4. Connect brake booster vacuum hose to intake manifold and to brake booster and secure them with clamps.
5. Install IAT sensor if necessary. Refer to Intake Air Temperature Sensor Installation.
6. Connect electrical connector at IAT sensor.
