Rodeo Sport 2WD L4-2.2L (2002)
Intake Air Duct: Service and Repair
REMOVAL PROCEDURE
1. Disconnect the negative battery cable.
2. Disconnect electrical connector at IAT sensor.
3. Remove the IAT sensor if necessary. Refer to Intake Air Temperature Sensor Removal.
4. Loosen retaining clamps at the throttle body and at the air filter box.
5. Disconnect brake booster vacuum hose at intake manifold and at brake booster.
6. Remove retaining nut at the intake air duct bracket at top of valve cover.
7. Disconnect the intake air duct from the throttle body and at the air filter box.
