VehiCROSS 4WD V6-3.5L (1999)
Propeller Shaft Run-out
Support the ends of the propeller shaft on V-blocks (2) and check for run-out by holding the probe of a dial indicator (1) in contact with the center part
of the shaft. If the amount of run-out is beyond the standard value for assembly, correct with a bench press or replace the shaft with a new propeller
shaft assembly.
Standard: 0.3 mm (0.012 inch)
Limit: 0.5 mm (0.02 inch)
Play in Splines in Normal Direction of Rotation
Check the amount of play between the sleeve yoke (1) and the propeller shaft spline (2) in the direction of rotation, using a pointed feeler gauge.
Standard: 0.073 - 0.156 mm (0.003 - 0.006 inch)
Limit: 0.3 mm (0.012 inch)
