Majestic L6-4.0L (1990)
3.
As the mast extends fully, loosen the locking nut completely and simultaneously pull the mast gently upwards.
4.
The mast and drive cable will be released by the motor (Illustration 2). Full extension of the mast should take approximately 7 seconds. A built in
timer will shut off the drive motor after approximately 12 seconds.
5.
if the drive cable is not released from the drive mechanism, the assistant should switch the radio off and on again immediately. Do not let go of the
mast after locking nut is fully loosened and do not exert excessive force on the cable in attempts to release it.
NOTE:
As the drive cable comes out of the guide tube, observe which direction the teeth on the cable are facing (forward or toward the driver's side,
so that the replacement can be aligned correctly during installation.
Leave the ignition and the radio switched on.
INSTALLING REPLACEMENT MAST
