Majestic L6-4.0L (1990)
Rear Door Window Motor: Service and Repair
RENEW
- Open the bonnet and disconnect the battery earth lead.
- Remove the veneer panel. See: Front Door/Front Door Panel/Service and Repair
- Remove the upper trim pad.
- Remove the lower trim pad.
- Fit tape over the door glass and frame (Fig 1) to secure the glass.
- Cut and remove the ratchet strap securing the block connector.
- Disconnect the cable harness block connector. Remove the screws securing the window lift motor assembly to the door panel.
- Remove the rubber cover from the window lift guide securing screws and remove the screws.
- Remove the rubber cover from the window lift guide securing screws and remove the screws.
- Displace the window lift motor from the glass and lower the window lift motor assembly into the bottom of the door.
- Remove the window lift motor (Fig 2) assembly from the door.
- Fitting a new motor assembly is the reversal of the removal procedure.
