S-Type (X200) V8-4.0L (AJ28) (2001)
/v8-4.0l_(aj28)/Page-1647023.png)
5. Cut sealant nozzle to achieve a triangular section bead 8 mm (0.32 in) wide by 10 mm (0.4 in) high.
6. Using a suitable pneumatic application gun, apply a uniform bead of sealant to the glass edge commencing at bottom centre and overlapping the
ends approximately 100 mm (4 in).
7. CAUTION: When installing the windshield, do not strike it in any way as this will crack the glass.
