Vanden Plas L6-4.2L (1982)
- Locate a new guide channel seal in position over the door glass.
- Position the guide channel over the seal and gently tap either side of the guide until the seal and the guide are firmly secured to the door glass.
- Refit the glass to the door, engage the lift motor operating arm with the guide channel. Refit the motor to the mounting plate, reconnect the electrical
feed cables.
- Refit the outer slide channel and secure with the bolts.
- Refit the distance piece to the rear of the mounting plate. Refit the window lower channel securing bolts.
- Refit the stop peg to the mounting plate and refit the window lift motor mounting plate, secure with the screws.
- Refit the door speaker, outer weatherstrip, front door crash rail, and door trim casing.
- Reconnect battery and check operation of window lift mechanism.
