Vanden Plas L6-4.2L (1982)
Trim Panel: Service and Repair
Driver's Underscuttle Casing
Removing
- Disconnect the battery.
- Unscrew locking ring (1. Fig. 48) securing speedometer trip to underscuttle casing. Remove two screws (2, Fig. 48) securing casing and quarter panel
to fascia support bracket.
- Lower top of casing sufficient to allow access to rheostat.
- Noting fitted position, detach leads from rheostat (3, Fig. 48).
- Withdraw underscuttle casing (4, Fig. 48) and quarter panel from car.
Refitting
- Place casing and quarter panel in car, feed speedometer trip through panel.
- Reconnect the rheostat.
- Secure casing and quarter panel with two screws.
- Refit locking ring to secure speedometer trip cable to casing.
- Reconnect the battery and check rheostat for correct operation.
