Vanden Plas (X308) V8-4.0L (AJ27) (2000)
Power Seat Motor: Service and Repair
Front Seat Headrest Motor
Removal
1. Power seat fully forward and position squab in fully upright position.
2. Remove front seat back finisher. See: Seat Back/Service and Repair
3. Remove battery cover and disconnect ground cable from battery terminal. See: Starting and Charging/Battery/Battery Cable/Negative/Service and
Repair
4. Release and remove seat tensioner spring.
5. Slacken and remove headrest motor securing screws and remove drive cable retaining plate.
6. Withdraw drive cable from motor.