Vanden Plas (X308) V8-4.0L (AJ27) (2000)
9. With keyways facing forward, fit headrest guide tubes in support boxes.
10. Ensure that lower segmented end of each headrest guide tube fully seats on lower flange of support box.
11. Fit chrome finisher rings to upper ends of headrest guide tubes.
12. Position armrest on seat squab and fit and tighten two securing screws.
13. Position armrest rear cover on frame fully seat upper retaining strip and secure with three hog rings.
14. Position squab mounting brackets and fit and tighten securing screws.
15. Fit and fully seat the six armrest rear aperture cover spring clips.