Vanden Plas (X308) V8-4.0L SC (AJ27) (2001)
/v8-4.0l_sc_(aj27)/Page-969022.png)
42. Disconnect and remove steering harness.
^
Disconnect harness connector from transducer.
^
Remove harness from suspension assembly.
43. Remove steering rack from crossbeam.
1. Remove steering rack securing bolts.
2. Remove steering rack and mounting brackets.
44. Release stabilizer bar from link arms.
^
Remove link arm to stabilizer bar securing nut.
^
Release link arm from stabilizer bar.
^
Repeat procedure to release opposite end of stabilizer bar from link arm.
45. Remove stabilizer bar from crossbeam.
^
Remove stabilizer bar securing bolts.
^
Remove stabilizer bar mounting brackets and remove bar from crossbeam.
46. Remove wishbone securing nuts.
1. Remove lower wishbone front arm eccentric bolt securing nut.
2. Remove lower wishbone rear arm eccentric bolt securing nut.
