Vanden Plas (X308) V8-4.0L SC (AJ27) (2001)
/v8-4.0l_sc_(aj27)/Page-609004.png)
11. Remove ABS/TCCM from the HCU.
^
Place the HCU on a work bench.
1. Disconnect electrical connector.
2. Remove bolts.
3. Remove ABS/TCCM.
12. Clean components and mating surfaces.
Installation
1. Install the ABS/TCCM to the HCU.
1. Install and tighten bolts.
2. Connect electrical connector.
