X-Type (X400) V6-3.0L (2002)
5. Using the special tools, remove the rear axle crossmember bush.
Installation
1. Using the special tools, install the rear axle crossmember bush.
2. NOTE: The final tightening of the suspension components must be carried out with the vehicle on its wheels.
-
Tighten to 126 Nm.
3. NOTE: The final tightening of the suspension components must be carried out with the vehicle on its wheels.
-
Tighten to 126 Nm.
4. NOTE: The final tightening of the suspension components must be carried out with the vehicle on its wheels.