XJ-Super V8 (X308) V8-4.0L SC (AJ27) (2002)
/v8-4.0l_sc_(aj27)/Page-291012.png)
16. Remove the crankshaft setting tool 303-531.
17. Install the crankshaft position sensor.
Install the sensor to the flywheel housing and install the securing bolt.
Tighten to 6 - 8 Nm.
Install the access grommet to the housing.
18. Lower the ramp.
19. Install the Timing Cover. See: Timing Cover/Service and Repair
20. Move the engine compartment cover from the service position and connect the gas struts.
21. Remove the paint protection sheets and close the cover.
22. Connect the battery and install the battery cover.
