XJ (X350) V8-4.2L (2005)
02. Remove 20 fixings, drill out with a 6.5 mm drill bit:
-
7 x fixings on the RH headlamp panel.
-
7 x fixings on the LH headlamp panel.
-
3 x Rear bracket RH.
-
3 x Rear bracket LH.
Remove old panel.
03. Place the new panel in position, and scribe mark the holes.
04. Remove the panel and use a 6.5 mm hole punch or 6.5 mm drill bit to make holes in the new panel.