XJ (X350) V8-4.2L (2005)
/v8-4.2l/Page-746006.png)
3. Connect the emission hose.
-
Connect the carbon canister electrical connector (if equipped).
NOTE: Left-hand shown, right-hand similar.
4. Loosely install the rear subframe front retaining bolt.
-
Install a new retaining bolt.
NOTE: Left-hand shown, right-hand similar.
5. Loosely install the noise, vibration and harshness brace retaining bolts.
6. Tighten to 125 Nm.
NOTE: Left-hand shown, right-hand similar.
